Tags |
|
|
Links |
|
|
Digg it UP - Upgrade: From CD-ROM to DVD Burner
The Light Crude Continuous Contract hit an all-time high at $70.85 a barrel, while Unleaded Gasoline Futures spiked 50% or $1 a gallon on Tuesday. However, oil closed the week at $67.57 a barrel, while gasoline finished the week up 15%. There's still uncertainty over the extent of oil and gasoline disruptions in the Gulf,
These letters “MA” stand for Master, meaning it is the master device on the ribbon cable. “SL” means Slave, and “CS” stands for
I've been in the ezine publishing business since 1998.I started out in the early days with short, text emails directing my readers to my web site for articles and tips I thought would be of interest to them.It was a crude beginning.I used Microsoft Outlook and managed my list manually.
First, unplug your computer, and disconnect all cables leading to the keyboard, mouse, printer, and monitor. Remove the computer’s side panel. Before reaching inside the computer, discharge your body’s static electricity by touching metal. If you have one, use an anti-static strap that you can attach to your wrist, grounding the other end to an outlet. Now, look at the back of your CD-ROM. You will see three cables connected to it. There will be a small audio cable, a large ribbon cable, and a power cable.
Unplug these carefully. The ribbon cable, and the power cable will be especially tight.
With the cables unplugged, now turn your attention to the sides of the CD-ROM. You will notice it is held in by two screws on each side. Remove the screws.
Warning: please do not use a magnetic screwdriver while working on a computer. Remember, your computer stores data magnetically. Think of the mischief it could cause.
After the screws are removed, slide the CD-ROM out the front of the case. Note that on the back of the CD-ROM is a rectangle containing six pins. Two of these pins will be jumpered together. Directly above the jumper will be the letters “CS”, “SL”, or “MA”. Remember this setting!
Take your new DVD burner, and look on the back of it for that jumper. Put the jumper in exactly the same setting as on the back of the old CD-ROM. If, for instance, it was underneath the letters “MA”, then set the jumper to “MA” on your new DVD burner.
These letters “MA” stand for Master, meaning it is the master device on the ribbon cable. “SL” means Slave, and “CS” stands for C
In a world where unemployment is high and competition for the few jobs available is stiff, one needs to know about the different ways of finding a job.Before you look for a job, though, you need to assess your strengths and weaknesses. You have to make sure that you are fit and equipped to deal with the demands of
Unplug these carefully. The ribbon cable, and the power cable will be especially tight.
With the cables unplugged, now turn your attention to the sides of the CD-ROM. You will notice it is held in by two screws on each side. Remove the screws.
Warning: please do not use a magnetic screwdriver while working on a computer. Remember, your computer stores data magnetically. Think of the mischief it could cause.
After the screws are removed, slide the CD-ROM out the front of the case. Note that on the back of the CD-ROM is a rectangle containing six pins. Two of these pins will be jumpered together. Directly above the jumper will be the letters “CS”, “SL”, or “MA”. Remember this setting!
Take your new DVD burner, and look on the back of it for that jumper. Put the jumper in exactly the same setting as on the back of the old CD-ROM. If, for instance, it was underneath the letters “MA”, then set the jumper to “MA” on your new DVD burner.
These letters “MA” stand for Master, meaning it is the master device on the ribbon cable. “SL” means Slave, and “CS” stands for
Are you wondering if Marshall Sylver is a scam artist? Does your stomach turn when the words Marshall Sylver Scam are used together in a sentence?Marshall Sylver, real name Marshall Sylwesterzak, was indicted by a grand jury in 2003 around his “Millionaire Mentorship Program.” This program was adver
With the cables unplugged, now turn your attention to the sides of the CD-ROM. You will notice it is held in by two screws on each side. Remove the screws.
Warning: please do not use a magnetic screwdriver while working on a computer. Remember, your computer stores data magnetically. Think of the mischief it could cause.
After the screws are removed, slide the CD-ROM out the front of the case. Note that on the back of the CD-ROM is a rectangle containing six pins. Two of these pins will be jumpered together. Directly above the jumper will be the letters “CS”, “SL”, or “MA”. Remember this setting!
Take your new DVD burner, and look on the back of it for that jumper. Put the jumper in exactly the same setting as on the back of the old CD-ROM. If, for instance, it was underneath the letters “MA”, then set the jumper to “MA” on your new DVD burner.
These letters “MA” stand for Master, meaning it is the master device on the ribbon cable. “SL” means Slave, and “CS” stands for
Even the best websites with the best marketing plans can run into some problems with traffic every now and again. However, if this happens to your website don’t worry because there are many different ways you can boost traffic with just a little effort. Consider the following 10 suggestions to re-gain your customers and b
After the screws are removed, slide the CD-ROM out the front of the case. Note that on the back of the CD-ROM is a rectangle containing six pins. Two of these pins will be jumpered together. Directly above the jumper will be the letters “CS”, “SL”, or “MA”. Remember this setting!
Take your new DVD burner, and look on the back of it for that jumper. Put the jumper in exactly the same setting as on the back of the old CD-ROM. If, for instance, it was underneath the letters “MA”, then set the jumper to “MA” on your new DVD burner.
These letters “MA” stand for Master, meaning it is the master device on the ribbon cable. “SL” means Slave, and “CS” stands for
One of the most frustrating aspects of search engine optimization is that the formulas that determine it do indeed change. There is also no one single formula for “beating the system” that works because each of the big search engines uses its own algorithms to determine suitability. This makes it a bit impossible to just
These letters “MA” stand for Master, meaning it is the master device on the ribbon cable. “SL” means Slave, and “CS” stands for Cable Select. Slide the DVD burner into the front of the case, getting it flush with the front surface. Attach it to the chassis, using the two screws on each side that we removed earlier.
Plug in the audio cable, the ribbon cable, and the power cable. The power cable is keyed so it can only be plugged in one way, and the ribbon cable port has a pin missing that corresponds to a blank spot in the plug, so these are easy to get in right. The audio cable is trickier. You must turn it so the white wire is pointed toward the ribbon cable.
Put the side panel back on and reconnect the monitor, keyboard, mouse, and any other devices you may have. Hook up the power cable, and boot up. Any Windows operating system 98SE or later will recognize your new equipment and load the appropriate drivers. You are ready to burn DVD’s!
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.diggitup.net/article/174797/diggitup-Upgrade-From-CDROM-to-DVD-Burner.html">Upgrade: From CD-ROM to DVD Burner</a>
BB link (for phorums):
[url=http://www.diggitup.net/article/174797/diggitup-Upgrade-From-CDROM-to-DVD-Burner.html]Upgrade: From CD-ROM to DVD Burner[/url]
Related Articles:
Which Business Opportunities Are Suitable For You?
How An Online Writer Can Easily Self-publish Their Way To A Fortune
Bookmark it:
|