Digg it UP - Business

Show Me The Money - What Your Business Plan Must Include
You’ve got your business idea, got the time to start the new business and your entrepreneur spirit is fired up but you need money and are off to the bank or a friendly angel investor with your business plan. Wait before you do, make sure that you have included this information.Business Models and Strategies: Ensure that your business is well structured and follows a recognized business model. Ensure that your business strategy for the next 3-5 years are well defined. This gives a potential investor confidence in your business ability and structure.Market Research: You must fully dem

printed circuit boards. The BOM should define all of the components along with the approved vendor and vendor's part number for each component. This information allows the Materials Management group to determine availability, packaging, and pricing for each component based on the quantities and vendor information. The BOM information is also needed to allow a technical review to determine the amount of labor and the equipment required to place the parts and to solder the components to

Venture Capital Alternative for Technology Entrepreneurs
If you are an entrepreneur with a small technology based company looking to take it to the next level, this article should be of particular interest to you. Your natural inclination may be to seek venture capital or private equity to fund your growth. According to Jim Casparie, founder and CEO of the Venture Alliance, the odds of getting Venture funding remain below 3%. Given those odds, the six to nine month process, the heavy, often punishing valuations, the expense of the process, this might not be the best path for you to take. We have created a hybrid M&A model designed to bring the appropriate capital resources to y

Contract electronics manufacturing service or EMS providers typically work with customers in a wide range of industries with differing requirements for inventory control, testing, product packaging, and product support. In some applications, the EMS provider simply assembles the printed circuit boards and then ships the boards to the customer. In other applications, the EMS provider will assemble the printed circuit board, load firmware/software into memory, test the board, and then assemble the board and associated cables, enclosures, and documentation into a finished product that is shipped to the customer. Some customers will provide all of the materials, raw boards and electronic components, required for a job and the EMS provider assemblies the printed circuit boards, performs any required testing, and ships the finished boards to the customer. This is generally considered as inventory provided on a consignment basis where the EMS provider basically provides labor and expertise only. Some customers provide some portion on the materials, such as specialty or high cost integrated circuits, proprietary parts such as transformers or coils, raw printed circuit boards, etc. and rely on the EMS provider to purchase the remainder of the components needed to assemble the boards. Most EMS providers prefer to use their own purchasing power, their extensive contacts, and their existing parts inventory where applicable to provide all of the required materials for a customer's particular project. This method is generally considered as inventory provided on a turn-key basis.

But before any of this can happen, the EMS provider must provide an assembled board quote or pricing estimate to the customer for the project. In addition to the quantity commitments, production release quantity and annual usage quantity, this pricing process also requires a detailed bill of material from the customer along with a set of the Gerber files for the printed circuit boards. The BOM should define all of the components along with the approved vendor and vendor's part number for each component. This information allows the Materials Management group to determine availability, packaging, and pricing for each component based on the quantities and vendor information. The BOM information is also needed to allow a technical review to determine the amount of labor and the equipment required to place the parts and to solder the components to

Who Drives You Up The Wall?
Is there someone where you work who absolutely, totally, and unequivocally drives you up the wall? Do you sometimes feel like climbing the wall all by yourself as the quickest way to escape? If you are saying Yes! Yes! Yes! you have had first-hand experience with "The Frustration Factor," up close and personal.The players of the world are alive and well and ready to drive you up the wall. Some are aggressive, some passive; some are extroverts and others introverts. Whatever their personalities, they are mostly motivated by personal needs, status goals, and insecurities. If their private goals are coincidentally com

semble the board and associated cables, enclosures, and documentation into a finished product that is shipped to the customer. Some customers will provide all of the materials, raw boards and electronic components, required for a job and the EMS provider assemblies the printed circuit boards, performs any required testing, and ships the finished boards to the customer. This is generally considered as inventory provided on a consignment basis where the EMS provider basically provides labor and expertise only. Some customers provide some portion on the materials, such as specialty or high cost integrated circuits, proprietary parts such as transformers or coils, raw printed circuit boards, etc. and rely on the EMS provider to purchase the remainder of the components needed to assemble the boards. Most EMS providers prefer to use their own purchasing power, their extensive contacts, and their existing parts inventory where applicable to provide all of the required materials for a customer's particular project. This method is generally considered as inventory provided on a turn-key basis.

10 Mindsets Web Entrepreneurs Must Have To Succeed
Entrepreneurship is a dynamic process of creating incremental wealth. Entrepreneurs willingly take part in the process of creating something new that has value by devoting time and effort and assuming the financial, psychic, and social risks. Luckily, we, as entrepreneurs, also receive the resulting rewards of independence, monetary profits from our endeavors, and the personal satisfaction of creating something viable.As the president and founder of the Association of Web Entrepreneurs and the National Association of Women Writers, I have had the pleasure of networking with, collaborating with, and le

or and expertise only. Some customers provide some portion on the materials, such as specialty or high cost integrated circuits, proprietary parts such as transformers or coils, raw printed circuit boards, etc. and rely on the EMS provider to purchase the remainder of the components needed to assemble the boards. Most EMS providers prefer to use their own purchasing power, their extensive contacts, and their existing parts inventory where applicable to provide all of the required materials for a customer's particular project. This method is generally considered as inventory provided on a turn-key basis.

Color It In
It's hard to believe that something as simple as color can let an audience know what a product is all about. Each color and shape has an underlying tone that lets the consumer know what to think when it is viewed. It may seem insignificant, but a color is an important extension of a brand's image.So why does color matter to consumers? The simplest answer is past experience. For example, the color red is used to express feelings of excitement and passion, such as red roses expressing love. When people see red they get excited and are drawn to it. Red is considered a "power color" because it symbolizes extreme

ials for a customer's particular project. This method is generally considered as inventory provided on a turn-key basis.

4 Things You Should Understand To Secure a Successful Online Business
1.) How to Build a functional Website There are several web builder sites available to the beginner that has no understanding of HTML. There are the site builders at GoDaddy, and Geocitiies, and then there is always Microsoft Frontpage. These are good places to start. More than just the look and functionality of the site must be considered, however. There are tags or headings to a website that lets the search engines know what your page is about the most important of these is called the META TAG. The meta tag, is like an extended keyword. When people search for the words in your meta tag, then it will show up a

The Gerber files for the printed circuit board design provide Materials Management with the information they need in order to get raw board pricing and lead times from the printed circuit board manufacturing vendors. The Gerber files also provide the Manufacturing Group with the information they need to develop the manufacturing plan, are components on top only or top and bottom of board; surface mount, thru hole, or mixed component types; wave solder or reflow oven processes required, etc. The Manufacturing Group also has to estimate time to program the component placement equipment and to load the components in the placement feeders, set-up costs, costs to order the solder paste stencils, and must also quantify test plans, procedures, and required test equipment. In order to correctly place components on the printed circuit board with each component properly oriented, the EMS provider will need silkscreen files to know the correct orientation of the parts on each side of the board. The screen paste file for surface mount applications will be required to order the stencils for the solder paste application to the board prior to the part placements.

All of this may seem to be a lot of information, but each piece is needed in order to provide the most cost effective pricing for the finished product. Fortunately, the Gerber files are usually readily available from the pcb design system as the Gerber format is the industry standard output format. The BOM is usually in the form of an Excel spreadsheet or formal drawing. Assist your EMS provider by providing the approved vendor's name and part number for each component.

In Summary:

The information required to prepare an accurate quotation for a typical printed circuit board assembly project includes:

-Definition of inventory method, consignment, partial consignment, or turn-key.
-Complete Bill of Material with at least one manufacturer's

HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.diggitup.net/article/20071/diggitup-What-Your-Electronics-Manufacturing-Service-Provider-Needs-from-You.html">What Your Electronics Manufacturing Service Provider Needs from You</a>

BB link (for phorums):
[url=http://www.diggitup.net/article/20071/diggitup-What-Your-Electronics-Manufacturing-Service-Provider-Needs-from-You.html]What Your Electronics Manufacturing Service Provider Needs from You[/url]

Postage stamps are the proof that the proper fee has been paid to send a piece of correspondence. If a postage stamp is not present on a piece of mail being sent, the recipient becomes responsible for paying the postage due. If the recipient does not wish to pay the postage due, then the item is returned to the original sender.

Many companies are experiencing a cutback in workforce, but not in workload! For the employees left behind to pick up the pieces,accessing valuable company information becomes increasingly complex...

The use of an arbitration clause within any contract is the best way to prevent ending up in lengthy and expensive court battles.

Tags

Links

Digg it UP - What Your Electronics Manufacturing Service Provider Needs from You

Related Articles: