Tags |
|
|
Links |
|
|
Digg it UP - TQM Implementation Project Part 7a (Amended)- The CONTROL Phase How to Do It
A crane, which is equipped with a derrick or tower, is used to lower and lift materials with the use of pulleys and cable. Heavy equipment manufacturers and the construction industry use cranes in various activities connected with their process.Cranes used in the construction industry are mostly temporary structures either mounted on a vehicle which is built for the specific purpose of carrying the crane, or fixed to the ground. Cranes may be controlled by various methods such as radio control, infrared control or a built in control station using a push button pendant or by an operator sitting in t
This control chart is useful to monitor the trend of the performance in term is the control limits. However, in real situation, it is more complicated as there are cases where
Engineering is a great career choice for many. With 1.4 million engineering jobs in the U.S. alone, it’s no wonder this career field is a popular one. Let’s take a look at a few reasons why engineering is such a hot and rewarding career.Challenging WorkEngineers get to combine their creativity, mathematics and science background with technology in order to help solve everyday problems. They get to work on the design and development of new products, help with their production, monitoring, maintenance and testing.In alphabetical order, the main engineering specializations are: aerospace
They are some basic tools used in this phase, namely:-
Trend Charting | Control Chart | Documentation | Audit | On-job training | Re-certification
In this issue, I will deal with Trend Charting. Not only team member need to control the improvement result, equally important they track its continuity. Corrective action and short and long term solutions are critical components of the whole Improvement Projects to ensure sustainability of the improvement. However, members tends to keep track of the result without realizing it is that it is the corrective actions and solutions that bring about the improvement. In another words, the results is the consequences of the actions / solutions.
During this phase, least difficulties were encountered by team members. Perhaps it was due to the fact that most action / solution are taken placed in the work area they are in charge. However, there are cases where teams are set up for a cross-function project in which action / solution to be taken are in work areas not the responsibility of the team members. In which case, team members faced with the following difficulties :-
a) Action and solution are not carried out consistently
b) Some of the line workers are not aware of the changes
c) Tracking is focus on results but did not extend to the action / solution
Besides tracking and monitoring, it is important that new action / solution are standardized across the company with simple yet effective work instructions and Standard Operating Procedures. And they are periodically audited for compliance. That Management team has included these items in their operation review meeting until such a time they feel it is sustainable.
Control Chart This is a statistical chart that use to track the performance of a measures over time. It look like a line chart except that it has 3 additional lines around the line chart. One of the three lines is the Mean or average line, the other two are drawn on the upper and lower end of the mean line. While the mean line is easy to determine, since it is an average line of those data. The other two lines is not so straight forward. It required some calculations to determine the position of the line drawn.
I do not intend to work out the detail calculation of the two lines. Briefly, one of the line which is placed above the mean line is called the upper control limit (UCL) and the other line which is placed below the mean line is called the lower control limit (LCL). These two line are the boundary of the data performance in which should be within these limits at any time. If it is out of the range, then it indicates an out of control situation. Investigation need to be taken place to find out why the data is out of range.
This control chart is useful to monitor the trend of the performance in term is the control limits. However, in real situation, it is more complicated as there are cases where
Choosing a flat rate conference call is a smart choice for today's businesses. While it is easy to justify the benefits of services offered by conference call providers, it is important to realize that just like any other business expense it is important to review that cost and ensure that is actually providing a benefit for the company. When choosing a service provider read the contracts and service plans carefully. If the charge is not based on a flat rate, chances are you will be better off moving along elsewhere.If the fees and charges aren't clearly stated very early on there is a high chan
During this phase, least difficulties were encountered by team members. Perhaps it was due to the fact that most action / solution are taken placed in the work area they are in charge. However, there are cases where teams are set up for a cross-function project in which action / solution to be taken are in work areas not the responsibility of the team members. In which case, team members faced with the following difficulties :-
a) Action and solution are not carried out consistently
b) Some of the line workers are not aware of the changes
c) Tracking is focus on results but did not extend to the action / solution
Besides tracking and monitoring, it is important that new action / solution are standardized across the company with simple yet effective work instructions and Standard Operating Procedures. And they are periodically audited for compliance. That Management team has included these items in their operation review meeting until such a time they feel it is sustainable.
Control Chart This is a statistical chart that use to track the performance of a measures over time. It look like a line chart except that it has 3 additional lines around the line chart. One of the three lines is the Mean or average line, the other two are drawn on the upper and lower end of the mean line. While the mean line is easy to determine, since it is an average line of those data. The other two lines is not so straight forward. It required some calculations to determine the position of the line drawn.
I do not intend to work out the detail calculation of the two lines. Briefly, one of the line which is placed above the mean line is called the upper control limit (UCL) and the other line which is placed below the mean line is called the lower control limit (LCL). These two line are the boundary of the data performance in which should be within these limits at any time. If it is out of the range, then it indicates an out of control situation. Investigation need to be taken place to find out why the data is out of range.
This control chart is useful to monitor the trend of the performance in term is the control limits. However, in real situation, it is more complicated as there are cases where
Doing Car Wash fundraisers to help raise funds for kid’s organizations, makes a lot of sense, as the kids are making their own money and they can generate significant dollars to offset the costs of the club, team or youth group.It is possible to do a car wash fundraiser where no run-off goes into any body of water or storm drain. And I therefore you should look into ways to get this done. Otherwise you will be polluting the environment and breaking the law. You should be cognizant of this and only do a car wash fundraiser if you can do it legitimately.Now remember the authorities know these
a) Action and solution are not carried out consistently
b) Some of the line workers are not aware of the changes
c) Tracking is focus on results but did not extend to the action / solution
Besides tracking and monitoring, it is important that new action / solution are standardized across the company with simple yet effective work instructions and Standard Operating Procedures. And they are periodically audited for compliance. That Management team has included these items in their operation review meeting until such a time they feel it is sustainable.
Control Chart This is a statistical chart that use to track the performance of a measures over time. It look like a line chart except that it has 3 additional lines around the line chart. One of the three lines is the Mean or average line, the other two are drawn on the upper and lower end of the mean line. While the mean line is easy to determine, since it is an average line of those data. The other two lines is not so straight forward. It required some calculations to determine the position of the line drawn.
I do not intend to work out the detail calculation of the two lines. Briefly, one of the line which is placed above the mean line is called the upper control limit (UCL) and the other line which is placed below the mean line is called the lower control limit (LCL). These two line are the boundary of the data performance in which should be within these limits at any time. If it is out of the range, then it indicates an out of control situation. Investigation need to be taken place to find out why the data is out of range.
This control chart is useful to monitor the trend of the performance in term is the control limits. However, in real situation, it is more complicated as there are cases where
Building a house or any facility requires permits that indicate strict adherence to government and, in some cases, even international requirements. Construction, like other professional fields, has its areas of specializations. Architects take care of the infrastructure material and design. The civil engineer enters the picture when constructing larger facilities that often involve elevators. The electrical engineer takes care of the proper wiring of the house or building. And of course, the HVAC or heat, ventilation, and air-conditioning contractor takes care of temperature control. The HVAC person is an
Control Chart This is a statistical chart that use to track the performance of a measures over time. It look like a line chart except that it has 3 additional lines around the line chart. One of the three lines is the Mean or average line, the other two are drawn on the upper and lower end of the mean line. While the mean line is easy to determine, since it is an average line of those data. The other two lines is not so straight forward. It required some calculations to determine the position of the line drawn.
I do not intend to work out the detail calculation of the two lines. Briefly, one of the line which is placed above the mean line is called the upper control limit (UCL) and the other line which is placed below the mean line is called the lower control limit (LCL). These two line are the boundary of the data performance in which should be within these limits at any time. If it is out of the range, then it indicates an out of control situation. Investigation need to be taken place to find out why the data is out of range.
This control chart is useful to monitor the trend of the performance in term is the control limits. However, in real situation, it is more complicated as there are cases where
Question: "How do I get my boss to treat others with respect in a meeting?"Simple answer: "It depends."You see, we always have three choices when confronted by a dilemma. We can:1) Change the situation. In this case we could talk to the boss about how disrespect undermines a meeting's effectiveness. Of course, this depends upon the boss. If the boss is a mean, vindictive person who fired the last person who made a suggestion, attempting to change the boss could be a bad idea.2) Change yourself. Here, you find ways to cope. For example, you could avoid meetings held by your boss
This control chart is useful to monitor the trend of the performance in term is the control limits. However, in real situation, it is more complicated as there are cases where the data performance is within the two lines, it is still consider out of control. Example, if the data move along above the mean line for more than 7 points in a row. It is called a "RUN".... There are several others but will not be discussed here.
In summary, the trend chart and control chart is used to monitor the performance of the data. However, by the time it is plotted onto the chart, it is already history. Nevertheless, it is still a good tools to track the performance of the data basic on his performance over time. This will tell the team whether their solution provides a long term sustainability performance. In my next article, I will deal with Documentation and Audit of solution.
----------------------------------------------------------------
Disclaimer: This article is written by the author based on his practical application experience. All definitions and interpretation of terminology are his point of view and has it has no intention to conflict with experts in similar field. The author holds no responsibility for the use of this article in any way.
-----------------------------------------------------------------
Free to reprint or re-publish: All rights reserved. You are free to reprint or re-publish this article as long as you include my resource box at the end of this article. Please ensure that the URL in the resource box remain intact and it is linked to the author's website.
-----------------------------------------------------------------
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.diggitup.net/article/22349/diggitup-TQM-Implementation-Project-Part-7a-Amended-The-CONTROL-Phase-How-to-Do-It.html">TQM Implementation Project Part 7a (Amended)- The CONTROL Phase How to Do It</a>
BB link (for phorums):
[url=http://www.diggitup.net/article/22349/diggitup-TQM-Implementation-Project-Part-7a-Amended-The-CONTROL-Phase-How-to-Do-It.html]TQM Implementation Project Part 7a (Amended)- The CONTROL Phase How to Do It[/url]
Related Articles:
Training: Using Games to Embed Learning
Bookmark it:
|