Tags |
|
|
Links |
|
|
Digg it UP - The Proper Handling of Welding Rods
Corporate Investment Recovery ProgramsEvery business eventually has items they no longer need. For some businesses this may be machine tools, processing lines, and even complete plants, while for others it’s overstocked inventory, end of life products, computers or vehicles. Most
There are many fundraising companies that are out there today, and one of the most well-known and successful of all is the Ready Fundraising Company. They are a fundraising company which began in the year 1909 as the manufacturer of Ready Jell, and this firm is one which supplies and sells fundraising programs to
Let's look at what's wrong with each…
First and foremost, ALWAYS open the "right" end of the can. Some cans and boxes even say "open other end", or "don't open this end", or "the other end moron!." (last one made up by me.) The reason you need to open the right end is because you can damage the flux coating. You want to open it on the side where the rod is bare for the stinger, or electrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.
Most guys out in the field aren't gonna' be thinking about the welding rods inside the can as they toss them from the truck to the ground. When the cans get manhandled the flux gets jarred loose on the welding rods inside. It's bad enough when the flux gets chipped off the end of the rod, flux chipped from the middle and you ca
The surety and effectiveness of a Six Sigma project relies heavily on leveraging the enterprise-wide knowledge of the project implementation team. Hoping for the best could hardly have any meaning, provided the team lacks overall knowledge of the goals, customs, and the treasury of knowledge and practices of the
Let's look at what's wrong with each…
First and foremost, ALWAYS open the "right" end of the can. Some cans and boxes even say "open other end", or "don't open this end", or "the other end moron!." (last one made up by me.) The reason you need to open the right end is because you can damage the flux coating. You want to open it on the side where the rod is bare for the stinger, or electrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.
Most guys out in the field aren't gonna' be thinking about the welding rods inside the can as they toss them from the truck to the ground. When the cans get manhandled the flux gets jarred loose on the welding rods inside. It's bad enough when the flux gets chipped off the end of the rod, flux chipped from the middle and you c
Publishing is a fascinating business and the process that goes into the making of books and newspapers is an interesting one. These days, with the world of digital information and the internet upon us, the scope of publishing now also includes websites, blogs and the like.From the business perspective, pub
Most guys out in the field aren't gonna' be thinking about the welding rods inside the can as they toss them from the truck to the ground. When the cans get manhandled the flux gets jarred loose on the welding rods inside. It's bad enough when the flux gets chipped off the end of the rod, flux chipped from the middle and you c
Is TV hurting your business productivity?I'd like to demonstrate that watching television can actually harm your efforts towards financial freedom.1) TV watching encourages passivityWatching TV requires less energy and initiative than any other activity. (Did you know that while watching tele
Most guys out in the field aren't gonna' be thinking about the welding rods inside the can as they toss them from the truck to the ground. When the cans get manhandled the flux gets jarred loose on the welding rods inside. It's bad enough when the flux gets chipped off the end of the rod, flux chipped from the middle and you c
Business Availability Center products are an extensive package of advanced, state-of-the-art tools for measuring and managing critical business processes to ensure business efficiency, stability and longevity in the market. Designed by Mercury Interactive, Business Availability Center products offer users an inno
You can use a lot of different ways to open rod cans out in the field if you are careful. I've even used the P38 C ration can opener I had in the army.If you use an oxygen/acetylene torch you need to be real careful not to burn the flux on the rods inside.
You can open a rod can with a chipping hammer, but it's not advisable. You gotta' be sure and hit it just right, at the edge of the can. You should hit the edge with the hammer follow-through swinging away from the can, not striking down into the can at the top. (I'm sure the electrode manufacturers are cringing when they read this!)
Of course the best way is whatever the can is designed
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.diggitup.net/article/2576/diggitup-The-Proper-Handling-of-Welding-Rods.html">The Proper Handling of Welding Rods</a>
BB link (for phorums):
[url=http://www.diggitup.net/article/2576/diggitup-The-Proper-Handling-of-Welding-Rods.html]The Proper Handling of Welding Rods[/url]
Related Articles:
You Can Laugh At Money Worries - If You Avoid This One Mistake
Extra Profits At Your Craft Show Booth
Bookmark it:
|