iminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It

There are certain hardwoods that are vulnerable to weather and climate changes. Some woods contract or shorten when it is hot. Others expand when there is moisture. When this happens, the floor becomes uneven. If left unchecked, it could ruin the look of the room and even become hazardous enough to cause accidents.

You do not have to take out the planks and replace them. The more practical solution is to sand them. Sanding your floor is a project that needs your dedication and time, whether you do it yourself or hire a contractor for it.

Sanding It All Away

For the initial sanding, you will need to use the coarsest sandpaper- the 20 grit. There is a sanding machine that you can use to make the whole ordeal easier and faster.

For efficiency, you will need to sand the floor at a 45 degree angle to the grain. It may take several rounds before the surface evens. It really depends on the precision of the tongue-and-grove milling of the hardwood.

Another technique is pushing and pulling the sander as it moves. The pressure is strong as it moves forward. You will need to lift the sander at an angle and apply pressure as it moves back. Continue this method until the diagonal scratches are not visible anymore. You must be careful that the traces of the sandpaper are eliminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It

do not have to take out the planks and replace them. The more practical solution is to sand them. Sanding your floor is a project that needs your dedication and time, whether you do it yourself or hire a contractor for it.

Sanding It All Away

For the initial sanding, you will need to use the coarsest sandpaper- the 20 grit. There is a sanding machine that you can use to make the whole ordeal easier and faster.

For efficiency, you will need to sand the floor at a 45 degree angle to the grain. It may take several rounds before the surface evens. It really depends on the precision of the tongue-and-grove milling of the hardwood.

Another technique is pushing and pulling the sander as it moves. The pressure is strong as it moves forward. You will need to lift the sander at an angle and apply pressure as it moves back. Continue this method until the diagonal scratches are not visible anymore. You must be careful that the traces of the sandpaper are eliminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It

20 grit. There is a sanding machine that you can use to make the whole ordeal easier and faster.

For efficiency, you will need to sand the floor at a 45 degree angle to the grain. It may take several rounds before the surface evens. It really depends on the precision of the tongue-and-grove milling of the hardwood.

Another technique is pushing and pulling the sander as it moves. The pressure is strong as it moves forward. You will need to lift the sander at an angle and apply pressure as it moves back. Continue this method until the diagonal scratches are not visible anymore. You must be careful that the traces of the sandpaper are eliminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It

Another technique is pushing and pulling the sander as it moves. The pressure is strong as it moves forward. You will need to lift the sander at an angle and apply pressure as it moves back. Continue this method until the diagonal scratches are not visible anymore. You must be careful that the traces of the sandpaper are eliminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It

iminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It may be hard to sand if you do not do this. Sandpaper also contains aluminum oxide so scratching the two surfaces against each other will take more force.